Diskettes Jokes / Recent Jokes

So you think you're computer-illiterate?
1. Compaq is considering changing the command "Press Any Key" to "Press Return Key" because of the flood of calls asking where the "Any" key is.
2. AST technical support had a caller complaining that her mouse was hard to control with the dust cover on. The cover turned out to be the plastic bag the mouse was packaged in.
3. Another Compaq technician received a call from a man complaining that the system wouldn't read word processing files from his old diskettes. After trouble-shooting for magnets and heat failed to diagnose the problem, it was found that the customer labelled the diskettes then rolled them into the typewriter to type the labels.
4. Another AST customer was asked to send a copy of her defective diskettes. A few days later a letter arrived from the customer along with Xeroxed copies of the floppies.
5. A Dell technician advised his customer to put his troubled floppy back in the more...

So you think you're computer-illiterate?
1. Compaq is considering changing the command "Press Any Key" to "Press Return Key" because of the flood of calls asking where the "Any" key is.
2. AST technical support had a caller complaining that her mouse was hard to control with the dust cover on. The cover turned out to be the plastic bag the mouse was packaged in.
3. Another Compaq technician received a call from a man complaining that the system wouldn't read word processing files from his old diskettes. After trouble-shooting for magnets and heat failed to diagnose the problem, it was found that the customer labelled the diskettes then rolled them into the typewriter to type the labels.
4. Another AST customer was asked to send a copy of her defective diskettes. A few days later a letter arrived from the customer along with Xeroxed copies of the floppies.
5. A Dell technician advised his customer to put his troubled floppy back in the more...

By following the instructions below, you should have error-free, long-lasting floppy disks. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.
Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.
Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.
Diskettes cannot be backed up by running them through more...

By following the instructions below, you should have error-free, long-lasting floppy disks.
1. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
2. Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.
3. Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.
4. Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.
5. Diskettes cannot be backed up by more...

The following is an excerpt from the Wall Street Journal by Jim Carlton.
This was forwarded by P. Wyatt.
1. Compaq is considering changing the command "Press Any Key," "Press Return Key" because of the flood of calls asking where the "Any" key is.
2. AST technical support had a caller complaining that her mouse was
hard to control with the dust cover on. The cover turned out to be the
plastic bag the mouse was packaged in.
3. Another Compaq technician received a call from a man complaining
that the system wouldn't read word processing files from his old diskettes.
After trouble-shooting for magnets and heat failed to diagnose the problem,
it was found that the customer labeled the diskettes then rolled them into
the typewriter to type the labels.
4. Another AST customer was asked to send a copy of her defective diskettes.
A few days later a letter arrived from the customer along with more...

Actual calls to technical supportComputer novices may feel like they`re alone these days, but some of the following calls to IBM`s help center show there are plenty of people out there who still are inching onto the information superhighway.

After a caller gave a technician her PC`s serial number, he scanned a database of registered users and responded, "I see you have an Aptiva" desktop unit. Before he could say another word, the caller shrieked and said she`d be right back. When the customer returned, the technician asked if she was all right. The caller responded: "Had I realized you could see me, I never would have telephoned in my bathrobe."

A customer who had just received a laptop computer asked about the power-saving feature known as "hibernate." Would this hibernate device work in the spring and summer, the caller asked.

Another caller explained she had received a gift of software on 5. 25-inch diskettes, but she more...

1. Compaq is considering changing the command "Press Any Key" to "Press Return Key" because of the flood of calls asking where the "Any" key is.
2. AST technical support had a caller complaining that her mouse was hard to control with the dust cover on. The cover turned out to be the plastic bag the mouse was packaged in.
3. Another Compaq technician received a call from a man complaining that the system wouldn't read word processing files from his old diskettes. After trouble-shooting for magnets and heat failed to diagnose the problem, it was found that the customer labeled the diskettes then rolled them into his typewriter to type the labels.
4. Another AST customer was asked to send a copy of her defective diskettes to the technician. A few days later a letter arrived from the customer along with Xeroxed copies of her diskettes.
5. A Dell technician advised his customer to put his troubled floppy back in the drive and close the more...