Surface Jokes / Recent Jokes

Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
Disketts should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shaving can be removed with scouring powder and soap. When waxing the diskette, make sure the surface is even. This will allow the disk to spin faster, resulting in better access time.
Do not fold diskette unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.
Diskette cannot be backed up by running them through the Xerox machine. If you need to back up your data, simply insert two diskettes into the drive. Whenever you update a document, the data will be written on both diskettes.
Never insert a diskette into a drive upside down. The data can fall off the more...

Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives.Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.Diskettes cannot be backed up by running them through the Xerox machine. If your data is going to need to be backed up, simply insert two diskettes into the drive. more...

Never leave diskettes in the drive, as the data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.
Diskettes should be cleaned and waxed once a week. Microscopic metal particles may be removed by waving a powerful magnet over the surface of the disk. Any stubborn metal shavings can be removed with scouring powder and steel wool. When waxing a diskette, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time.
Do not fold diskettes unless they do not fit into the drive. "Big" Diskettes may be folded and used in "Little" drives.
Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.
Diskettes cannot be backed up by running them through a photo copy machine. If your data is going to need to be backed up, simply insert TWO diskettes into more...

In an effort to clarify questions about the purported durability and unusual physical characteristics of Twinkies, we subjected the Hostess snack logs to the following experiments:
Exposure
A Twinkie was left on a window ledge for 4 days, during which time an inch and a half of rain fell. Many flies were observed crawling across the Twinkie’s surface, but contrary to hypothesis, birds, even pigeons, avoided this potential source of substance. Despite the rain and prolonged exposure to the sun, the Twinkie retained its original color and form. When removed, the Twinkie was found to be substantially dehydrated. Cracked open, it was observed to have taken on the consistency of industrial foam insulation; the filling however, retained its advertised “creaminess”
Radiation
A Twinkie was placed in a conventional microwave oven, which was set for precisely 4 minutes - the approximate cooking time of bacon. After 20 seconds, the oven began to emit the Twinkie’s more...

Never leave diskettes in the drive, as the data can leak
out of the disk and corrode the inner mechanics of the
drive. Diskettes should be rolled up and stored in
pencil holders.
Diskettes should be cleaned and waxed once a week.
Microscopic metal particles may be removed by waving a
powerful magnet over the surface of the disk. Any
stubborn metal shavings can be removed with scouring
powder and steel wool. When waxing a diskette, make sure
the surface is even. This will allow the diskette to
spin faster, resulting in better access time.
Do not fold diskettes unless they do not fit into the
drive. "Big" Diskettes may be folded and used in "Little" drives.
Never insert a diskette into the drive upside down. The
data can fall off the surface of the disk and jam the
intricate mechanics of the drive.
Diskettes cannot be backed up by running them through a
photo copy machine. If your data is going to more...

Proper Care of Floppies:

1. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders.

2. Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing diskettes, make sure application is even. This will allow the diskettes to spin faster, resulting in better access time.

3. Do not fold diskettes unless they do not fit in the drive.' Big' diskettes may be folded and used in' little' disk drives.

4. Never insert a disk into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive.

5. Diskettes cannot be backed up by running them through the Xerox machine. If your data is going to more...

By following the instructions below, you should have error-free, long-lasting floppy disks. Never leave diskettes in the disk drive, as data can leak out of the disk and corrode the inner mechanics of the drive. Diskettes should be rolled up and stored in pencil holders. Diskettes should be cleaned and waxed once a week. Microscopic metal particles can be removed by waving a powerful magnet over the surface of the disk. Any stubborn metallic shavings can be removed with scouring powder and soap. When waxing the diskettes, make sure the surface is even. This will allow the diskette to spin faster, resulting in better access time. Do not fold diskettes unless they do not fit into the drive. "Big" diskettes may be folded and used in "little" disk drives. Never insert a diskette into the drive upside down. The data can fall off the surface of the disk and jam the intricate mechanics of the drive. Diskettes cannot be backed up by running them through the xerox machine. more...